T. Nagaura and K. Tozawa, Lithium ion rechargeable battery, Prog. Batter. Sol. Cells, vol.9, pp.209-211, 1990.

H. J. Bang, H. Joachin, H. Yang, K. Amine, and J. Prakash, Contribution of the Structural Changes of LiNi[sub 0.8]Co[sub 0.15]Al[sub 0.05]O[sub 2] Cathodes on the Exothermic Reactions in Li-Ion Cells, Journal of The Electrochemical Society, vol.81, issue.82, pp.731-737, 2006.
DOI : 10.1016/S0378-7753(99)00135-4

K. Zaghib, J. Dubé, A. Dallaire, K. Galoustov, A. Guerfi et al., Enhanced thermal safety and high power performance of carbon-coated LiFePO4 olivine cathode for Li-ion batteries, Journal of Power Sources, vol.219, pp.36-44, 2012.
DOI : 10.1016/j.jpowsour.2012.05.018
URL : https://hal.archives-ouvertes.fr/hal-00750695

T. Ohzuku and Y. Makimura, for Lithium-Ion Batteries, Chemistry Letters, vol.30, issue.7, pp.642-643, 2001.
DOI : 10.1246/cl.2001.642

N. Yabuuchi and T. Ohzuku, Novel lithium insertion material of LiCo 1/3 Ni 1/3 Mn 1/3 O 2 for advanced lithium-ion batteries, J. Power Sources, pp.119-121, 2003.

A. Mauger, F. Gendron, and C. M. Julien, Magnetic properties of LixNiyMnyCo1???2yO2 (0.2???1???2y???0.5, 0???x???1), Journal of Alloys and Compounds, vol.520, pp.42-51, 2012.
DOI : 10.1016/j.jallcom.2011.12.055
URL : https://hal.archives-ouvertes.fr/hal-01236765

X. Zhang, W. J. Jiang, A. Mauger, F. Gendron, C. M. Julien et al., Minimization of the cation mixing in Li1+x(NMC)1???xO2 as cathode material, Journal of Power Sources, vol.195, issue.5, pp.1292-1301, 2010.
DOI : 10.1016/j.jpowsour.2009.09.029
URL : https://hal.archives-ouvertes.fr/hal-00616646

A. K. Padhi, K. S. Nanjundaswamy, and J. B. Goodenough, Phospho-olivines as Positive-Electrode Materials for Rechargeable Lithium Batteries, Journal of The Electrochemical Society, vol.144, issue.4, pp.1188-1194, 1997.
DOI : 10.1149/1.1837571
URL : http://jes.ecsdl.org/content/144/4/1188.full.pdf

N. Ravet, Y. Chouinard, J. F. Magnan, S. Besner, M. Gauthier et al., Electroactivity of natural and synthetic triphylite, Journal of Power Sources, vol.97, issue.98, pp.97-98, 2001.
DOI : 10.1016/S0378-7753(01)00727-3

A. Ait-salah, A. Mauger, C. M. Julien, and F. Gendron, Nano-sized impurity phases in relation to the mode of preparation of LiFePO4, Materials Science and Engineering: B, vol.129, issue.1-3, pp.232-244, 2006.
DOI : 10.1016/j.mseb.2006.01.022

C. M. Julien, K. Zaghib, A. Mauger, and H. Groult, Enhanced Electrochemical Properties of LiFePO₄ as Positive Electrode of Li-Ion Batteries for HEV Application, Advances in Chemical Engineering and Science, vol.02, issue.03, pp.321-329, 2012.
DOI : 10.4236/aces.2012.23037

K. Zaghib, A. Mauger, J. B. Goodenough, F. Gendron, and C. M. Julien, Positive electrode: Lithium iron phosphate, Encyclopedia of Electrochemical Power Sources, pp.264-296, 2009.
DOI : 10.1016/b978-044452745-5.00204-5

C. M. Julien, A. Mauger, and K. Zaghib, Surface effects on electrochemical properties of nano-sized LiFePO4, Journal of Materials Chemistry, vol.12, issue.121, pp.9955-9968, 2011.
DOI : 10.1016/j.elecom.2009.10.039
URL : https://hal.archives-ouvertes.fr/hal-00616809

K. Zaghib, A. Mauger, and C. M. Julien, Design and properties of LiFePO 4 nano-materials for high power applications In Nanotechnology for Lithium-ion Batteries, pp.179-220, 2012.

K. Rissouli, K. Benkhouja, J. R. Ramos-barrado, and C. M. Julien, Electrical conductivity in lithium orthophosphates, Materials Science and Engineering: B, vol.98, issue.3, pp.185-189, 2003.
DOI : 10.1016/S0921-5107(02)00574-3

D. Choi, D. Wang, I. Bae, J. Xiao, Z. Nie et al., Nanoplate Grown via Solid-State Reaction in Molten Hydrocarbon for Li-Ion Battery Cathode, Nano Letters, vol.10, issue.8, pp.2799-2805, 2010.
DOI : 10.1021/nl1007085

D. Wang, H. Buqa, M. Crouzet, G. Deghenghi, T. Drezen et al., High-performance, nano-structured LiMnPO4 synthesized via a polyol method, Journal of Power Sources, vol.189, issue.1, pp.624-628, 2009.
DOI : 10.1016/j.jpowsour.2008.09.077

S. K. Martha, B. Markovski, J. Grinblat, Y. Gofer, O. Haik et al., LiMnPO[sub 4] as an Advanced Cathode Material for Rechargeable Lithium Batteries, Journal of The Electrochemical Society, vol.156, issue.7, pp.541-552, 2009.
DOI : 10.1149/1.1617301

S. Oh, S. Oh, C. Yoon, B. Scrosati, K. Amine et al., High-Performance Carbon-LiMnPO4 Nanocomposite Cathode for Lithium Batteries, Advanced Functional Materials, vol.19, issue.98, pp.3260-3265, 2010.
DOI : 10.1002/adfm.201000469

Z. Bakenov and I. Tanigushi, LiMg[sub x]Mn[sub 1???x]PO[sub 4]/C Cathodes for Lithium Batteries Prepared by a Combination of Spray Pyrolysis with Wet Ballmilling, Journal of The Electrochemical Society, vol.157, issue.4, pp.430-436, 2010.
DOI : 10.1021/jp0486402

N. Ravet, M. Gauthier, K. Zaghib, A. Mauger, J. B. Goodenough et al., Synthesis from a Polymeric Additive, Chemistry of Materials, vol.19, issue.10, pp.2595-2602, 2007.
DOI : 10.1021/cm070485r
URL : https://hal.archives-ouvertes.fr/hal-00341038

M. L. Trudeau, D. Laul, R. Veillette, A. M. Serventi, K. Zaghib et al., In situ high-resolution transmission electron microscopy synthesis observation of nanostructured carbon coated LiFePO4, Journal of Power Sources, vol.196, issue.18, pp.7383-7394, 2011.
DOI : 10.1016/j.jpowsour.2011.04.003

Z. Bakenov, Physical and electrochemical properties of LiMnPO4/C composite cathode prepared with different conductive carbons, Journal of Power Sources, vol.195, issue.21, pp.7445-7451, 2010.
DOI : 10.1016/j.jpowsour.2010.05.023

T. Kim, H. Park, S. Lee, and H. Song, Restricted growth of LiMnPO4 nanoparticles evolved from a precursor seed, Journal of Power Sources, vol.210, pp.1-6, 2012.
DOI : 10.1016/j.jpowsour.2012.02.078

S. Oh, H. Jung, C. S. Yoon, S. Myung, Z. Chen et al., Enhanced electrochemical performance of carbon???LiMn1???xFexPO4 nanocomposite cathode for lithium-ion batteries, Journal of Power Sources, vol.196, issue.16, pp.6924-6928, 2011.
DOI : 10.1016/j.jpowsour.2010.11.159

K. Amine, H. Tukamoto, H. Yasuda, and Y. Fujita, Preparation and electrochemical investigation of LiMn2 ??? xMexO4 (Me: Ni, Fe, and x = 0.5, 1) cathode materials for secondary lithium batteries, Journal of Power Sources, vol.68, issue.2, pp.604-608, 1997.
DOI : 10.1016/S0378-7753(96)02590-6

Q. Zhong, A. Bonakdarpour, M. Zhang, Y. Gao, and J. Dahn, Synthesis and Electrochemistry of LiNi[sub x]Mn[sub 2???x]O[sub 4], Journal of The Electrochemical Society, vol.144, issue.1, pp.205-213, 1997.
DOI : 10.1149/1.1837386

J. Liu and A. Manthiram, Spinel Cathodes in Lithium-ion Cells, Chemistry of Materials, vol.21, issue.8, pp.1695-1707, 2009.
DOI : 10.1021/cm9000043

K. Zaghib, P. Charest, M. Dontigny, A. Guerfi, M. Lagacé et al., LiFePO4: From molten ingot to nanoparticles with high-rate performance in Li-ion batteries, Journal of Power Sources, vol.195, issue.24, pp.8280-8288, 2010.
DOI : 10.1016/j.jpowsour.2010.07.010
URL : https://hal.archives-ouvertes.fr/hal-00555476

F. Brochu, A. Guerfi, J. Trottier, M. Kopec, A. Mauger et al., Structure and electrochemistry of scaling nano C???LiFePO4 synthesized by hydrothermal route: Complexing agent effect, Journal of Power Sources, vol.214, pp.1-6, 2012.
DOI : 10.1016/j.jpowsour.2012.03.092

R. E. Garcia, Y. Chiang, W. C. Carter, P. Limthongkul, and C. M. Bishop, Microstructural Modeling and Design of Rechargeable Lithium-Ion Batteries, Journal of The Electrochemical Society, vol.5, issue.1, pp.255-263, 2005.
DOI : 10.1149/1.1836132

K. Zhao, M. Pharr, J. J. Vlassak, and Z. Suo, Fracture of electrodes in lithium-ion batteries caused by fast charging, Journal of Applied Physics, vol.108, issue.7, pp.735171-073517, 2010.
DOI : 10.1016/j.jpowsour.2010.04.044

S. Renganathan, G. Sikha, S. Santhanagopalan, and R. White, Theoretical Analysis of Stresses in a Lithium Ion Cell, Journal of The Electrochemical Society, vol.157, issue.2, pp.155-163, 2010.
DOI : 10.1016/j.jpowsour.2005.03.091

J. Vetter, P. Novak, M. R. Wagner, C. Veit, K. Möller et al., Ageing mechanisms in lithium-ion batteries, Journal of Power Sources, vol.147, issue.1-2
DOI : 10.1016/j.jpowsour.2005.01.006

M. Broussely, P. Biensan, F. Bonhomme, P. Blanchard, S. Herreyre et al., Main aging mechanisms in Li ion batteries, Journal of Power Sources, vol.146, issue.1-2, pp.90-96, 2005.
DOI : 10.1016/j.jpowsour.2005.03.172

W. Lu, C. M. Lopez, N. Liu, J. T. Vaughey, A. Jansen et al., Overcharge Effect on Morphology and Structure of Carbon Electrodes for Lithium-Ion Batteries, Journal of The Electrochemical Society, vol.159, issue.5, pp.2012-566
DOI : 10.1149/1.3158548

L. E. Downie, V. L. Chevrier, J. R. Dahn, and L. J. Krause, In situ detection of lithium plating on graphite electrodes using electrochemical microcalorimetry, Proceeding of the 222th ECS Meeting, pp.7-12, 2012.

E. Ferg, R. J. Gummow, A. De-kock, and M. M. Thackeray, Spinel Anodes for Lithium-Ion Batteries, Journal of The Electrochemical Society, vol.141, issue.11, pp.147-150, 1994.
DOI : 10.1149/1.2059324

T. Ohzuku, A. Ueda, and N. Yamamoto, Zero-Strain Insertion Material of Li[Li[sub 1???3]Ti[sub 5???3]]O[sub 4] for Rechargeable Lithium Cells, Journal of The Electrochemical Society, vol.142, issue.5, pp.1431-1435, 1995.
DOI : 10.1149/1.2048592

M. M. Thackeray, S. Megahed, B. M. Barnett, and L. Xie, Lithiated Oxides for Lithium-Ion Batteries In Rechargeable Lithium and Lithium-Ion Batteries, The Electrochem. Soc. Proc. Series, p.233, 1995.

A. Ait-salah, A. Mauger, K. Zaghib, J. B. Goodenough, N. Ravet et al., Reduction Fe[sup 3+] of Impurities in LiFePO[sub 4] from Pyrolysis of Organic Precursor Used for Carbon Deposition, Journal of The Electrochemical Society, vol.4, issue.36, pp.1692-1701, 2006.
DOI : 10.1149/1.1890766

S. J. Shi, J. P. Tu, Y. J. Mai, Y. Q. Zhang, C. D. Gu et al., Effect of carbon coating on electrochemical performance of Li1.048Mn0.381Ni0.286Co0.286O2 cathode material for lithium-ion batteries, Electrochimica Acta, vol.63, pp.112-117, 2012.
DOI : 10.1016/j.electacta.2011.12.082

D. Li, Y. Kato, K. Kobayakawa, H. Noguchi, and Y. Sato, Preparation and electrochemical characteristics of LiNi1/3Mn1/3Co1/3O2 coated with metal oxides coating, Journal of Power Sources, vol.160, issue.2, pp.1342-1348, 2006.
DOI : 10.1016/j.jpowsour.2006.02.080

D. Aurbach, K. Gamolsky, B. Markovsky, G. Salitra, Y. Gofer et al., The Study of Surface Phenomena Related to Electrochemical Lithium Intercalation into Li[sub x]MO[sub y] Host Materials (M = Ni, Mn), Journal of The Electrochemical Society, vol.147, issue.4, pp.1322-1331, 2000.
DOI : 10.1149/1.1393357

A. M. Kannan, L. Rabenberg, and A. Manthiram, High Capacity Surface-Modified LiCoO[sub 2] Cathodes for Lithium-Ion Batteries, Electrochemical and Solid-State Letters, vol.5, issue.1, pp.16-18, 2003.
DOI : 10.1149/1.1526782

S. Oh, J. K. Lee, D. Byun, W. Cho, and B. W. Cho, Effect of Al2O3 coating on electrochemical performance of LiCoO2 as cathode materials for secondary lithium batteries, Journal of Power Sources, vol.132, issue.1-2, pp.249-255, 2004.
DOI : 10.1016/j.jpowsour.2004.01.049

H. Kweon, J. J. Park, J. W. Seo, G. B. Kim, B. H. Jung et al., Effects of metal oxide coatings on the thermal stability and electrical performance of LiCoCO2 in a Li-ion cell, Journal of Power Sources, vol.126, issue.1-2, pp.156-162, 2004.
DOI : 10.1016/j.jpowsour.2003.08.037

K. Y. Chung, W. Yoon, H. S. Lee, J. Mcbreen, X. Yang et al., In situ XRD studies of the structural changes of ZrO2-coated LiCoO2 during cycling and their effects on capacity retention in lithium batteries, situ XRD studies of the structural changes of ZrO 2 -coated LiCoO 2 during cycling and their effects on capacity retention in lithium batteries, pp.185-190, 2006.
DOI : 10.1016/j.jpowsour.2005.12.063

Z. Chen and J. Dahn, Effect of a ZrO[sub 2] Coating on the Structure and Electrochemistry of Li[sub x]CoO[sub 2] When Cycled to 4.5 V, Electrochemical and Solid-State Letters, vol.139, issue.10, pp.213-216, 2002.
DOI : 10.1149/1.1503202

G. Li, Z. Yang, and W. Yang, Effect of FePO4 coating on electrochemical and safety performance of LiCoO2 as cathode material for Li-ion batteries, Journal of Power Sources, vol.183, issue.2, pp.741-748, 2008.
DOI : 10.1016/j.jpowsour.2008.05.047

H. Wang, W. Zhang, and L. Zhu, Effect of LiFePO 4 coating on electrochemical performance of LiCoO 2 at high temperature. Solid State Ion, pp.131-136, 2007.

T. Yi, J. Shu, C. Yue, X. Zhu, A. Zhou et al., Enhanced cycling stability of microsized LiCoO2 cathode by Li4Ti5O12 coating for lithium ion battery, Materials Research Bulletin, vol.45, issue.4, pp.456-459, 2010.
DOI : 10.1016/j.materresbull.2009.11.007

H. Kim, Y. Kim, S. Kim, and S. W. Martin, Enhanced electrochemical properties of LiNi1/3Co1/3Mn1/3O2 cathode material by coating with LiAlO2 nanoparticles, Journal of Power Sources, vol.161, issue.1, pp.623-627, 2006.
DOI : 10.1016/j.jpowsour.2006.03.092

Y. Kim, H. Kim, and S. W. Martin, Synthesis and electrochemical characteristics of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion batteries, Electrochimica Acta, vol.52, issue.3, pp.1316-1322, 2006.
DOI : 10.1016/j.electacta.2006.07.033

H. S. Kim, M. Kong, K. Kim, I. J. Kim, and H. B. Gu, Effect of carbon coating on LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries, Journal of Power Sources, vol.171, issue.2, pp.917-921, 2007.
DOI : 10.1016/j.jpowsour.2007.06.028

Q. Cao, H. P. Zhang, G. J. Wang, Q. Xia, Y. P. Wu et al., A novel carbon-coated LiCoO2 as cathode material for lithium ion battery, Electrochemistry Communications, vol.9, issue.5, pp.1228-1232, 2007.
DOI : 10.1016/j.elecom.2007.01.017

C. M. Julien, Study of the surface modification of LiNi 1/3 Co 1/3 Mn 1/3 O 2 cathode material for lithium-ion battery, J. Power Sources, vol.196, pp.8632-8637, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00616948

P. Samarasingha, D. Tran-nguyen, M. Behm, and A. Wijayasinghe, LiNi1/3Mn1/3Co1/3O2 synthesized by the Pechini method for the positive electrode in Li-ion batteries: Material characteristics and electrochemical behaviour, Electrochimica Acta, vol.53, issue.27, pp.7995-8000, 2008.
DOI : 10.1016/j.electacta.2008.06.003

K. Zaghib, M. Trudeau, A. Guerfi, J. Trottier, A. Mauger et al., New advanced cathode material: LiMnPO4 encapsulated with LiFePO4, Journal of Power Sources, vol.204, pp.177-181, 2012.
DOI : 10.1016/j.jpowsour.2011.11.085

M. Minakshi, P. Singh, D. Appadoo, and D. E. Martin, Synthesis and characterization of olivine LiNiPO4 for aqueous rechargeable battery, Electrochimica Acta, vol.56, issue.11, pp.4356-4360, 2011.
DOI : 10.1016/j.electacta.2011.01.017

Z. Moorhead-rosenberg, D. W. Shin, K. R. Chemelewski, J. B. Goodenough, and A. Manthiram, Quantitative determination of Mn 3+ content in LiMn 1.5 Ni 0.5 O 4 spinel cathodes by magnetic measurements, Appl. Phys. Lett, vol.100, issue.213909, pp.1-2139095, 2012.

H. M. Wu, I. Belharouak, A. Abouimrane, Y. Sun, and K. Amine, Surface modification of Li 0.5 Mn 1.5 O 4 by ZrP 2 O 7 and ZrO 2 for lithium-ion batteries, Chem. Mater, vol.22, pp.587-603, 2010.

D. Liu, J. Han, M. Dontigny, P. Charest, A. Guerfi et al., Redox Behaviors of Ni and Cr with Different Counter Cations in Spinel Cathodes for Li-Ion Batteries, Journal of The Electrochemical Society, vol.157, issue.7, pp.770-775, 2010.
DOI : 10.1149/1.1837870

D. Liu, J. Han, and J. B. Goodenough, Structure, morphology, and cathode performance of Li1???x[Ni0.5Mn1.5]O4 prepared by coprecipitation with oxalic acid, Journal of Power Sources, vol.195, issue.9, pp.2918-2923, 2010.
DOI : 10.1016/j.jpowsour.2009.11.024

D. Liu, J. Trottier, P. Charest, J. Fréchette, A. Guerfi et al., Effect of nano LiFePO4 coating on LiMn1.5Ni0.5O4 5V cathode for lithium ion batteries, Effect of nano LiFePO 4 coating on, pp.127-132, 2012.
DOI : 10.1016/j.jpowsour.2011.11.059

K. Zaghib, M. Dontigny, A. Guerfi, P. Charest, I. Rodrigues et al., Safe and fast-charging Li-ion battery with long shelf life for power applications, Journal of Power Sources, vol.196, issue.8, pp.3949-3954, 2011.
DOI : 10.1016/j.jpowsour.2010.11.093
URL : https://hal.archives-ouvertes.fr/hal-00616802

K. Zaghib, M. Dontigny, A. Guerfi, J. Trottier, J. Hamel-paquet et al., An improved high-power battery with increased thermal operating range: C???LiFePO4//C???Li4Ti5O12, Journal of Power Sources, vol.216, pp.192-200, 2012.
DOI : 10.1016/j.jpowsour.2012.05.025

S. E. Sloop, J. K. Pugh, S. Wang, J. B. Kerr, and K. Kinoshita, Chemical Reactivity of PF[sub 5] and LiPF[sub 6] in Ethylene Carbonate/Dimethyl Carbonate Solutions, Electrochemical and Solid-State Letters, vol.191, issue.82, pp.42-44, 2001.
DOI : 10.1149/1.1353158

H. Yang, G. V. Zhuang, and P. N. Ross, Thermal stability of LiPF6 salt and Li-ion battery electrolytes containing LiPF6, Journal of Power Sources, vol.161, issue.1, pp.573-579, 2006.
DOI : 10.1016/j.jpowsour.2006.03.058

T. Zheng, A. S. Gozdz, and G. G. Amatucci, Reactivity of the Solid Electrolyte Interface on Carbon Electrodes at Elevated Temperatures, Journal of The Electrochemical Society, vol.146, issue.11, pp.4014-4018, 1999.
DOI : 10.1149/1.1392585

Y. Matsuo, R. Kostecki, and F. Mclarnon, Surface Layer Formation on Thin-Film LiMn[sub 2]O[sub 4] Electrodes at Elevated Temperatures, Journal of The Electrochemical Society, vol.140, issue.82, pp.687-692, 2001.
DOI : 10.1149/1.1373658

C. M. Julien, Structural and magnetic properties of Li x (Mn y Fe 1?y )PO 4 electrode material for Li-ion batteries, J. Power Sources, vol.189, pp.1154-1163, 2009.

Y. Lu, J. Shi, Z. Guo, Q. Tong, W. Huang et al., Synthesis of LiFe1???xNixPO4/C composites and their electrochemical performance, Journal of Power Sources, vol.194, issue.2, pp.786-793, 2009.
DOI : 10.1016/j.jpowsour.2009.05.041

D. Y. Wang, Z. X. Wang, X. J. Huang, and L. Chen, Continuous solid solutions LiFe1???xCoxPO4 and its electrochemical performance, Journal of Power Sources, vol.146, issue.1-2, pp.580-583, 2005.
DOI : 10.1016/j.jpowsour.2005.03.049

Y. Zhang, C. S. Sun, and Z. Zhou, Sol???gel preparation and electrochemical performances of LiFe1/3Mn1/3Co1/3PO4/C composites with core???shell nanostructure, Electrochemistry Communications, vol.11, issue.6, pp.1183-1186, 2009.
DOI : 10.1016/j.elecom.2009.03.044

L. Daniel, S. Martinet, T. Gutel, G. Bourbon, E. Radvanyi et al., Iron substitution to increase energy density of lithiated phosphates, Proceeding of the 222th ECS Meeting, pp.7-12, 2012.

M. Minakshi and P. Singh, Olivine type LiMn 1/3 Co 1/3 Ni 1/3 PO 4 cathode for secondary battery applications, Proceeding of the 222th ECS Meeting, pp.7-12, 2012.

X. J. Wang, X. Q. Yu, H. Li, X. Q. Yang, J. Mcbreen et al., Li-storage in LiFe1/4Mn1/4Co1/4Ni1/4PO4 solid solution, Electrochemistry Communications, vol.10, issue.9, pp.1347-1350, 2008.
DOI : 10.1016/j.elecom.2008.07.010

S. Oh, S. Myung, J. Park, B. Scrosati, K. Amine et al., A novel double-structured LiMn 0.85 Fe 0.15 PO 4 : LiFePO 4 core-shell materials for rechargeable lithium-ion batteries, Proceeding of the 222th ECS Meeting, pp.7-12, 2012.

W. Kim, S. Kim, I. C. Jang, H. H. Lim, and Y. S. Lee, Remarkable improvement in cell safety for Li, pp.87-90

R. A. Huggins, Do you really want an unsafe battery? In Proceeding of Pacific Rim Meeting on Electrochemical and Solid-State Science (PRIME) of the 222th ECS Meeting, pp.7-12, 2012.

K. Xu and C. A. Angell, Sulfone-Based Electrolytes for Lithium-Ion Batteries, Journal of The Electrochemical Society, vol.146, issue.44, pp.920-926, 2002.
DOI : 10.1149/1.1483866

D. Han, Y. Kang, R. Yi, M. Song, and H. Kwon, Effects of Fe doping on the electrochemical performance of LiCoPO4/C composites for high power-density cathode materials, Electrochemistry Communications, vol.11, issue.1, pp.137-140, 2009.
DOI : 10.1016/j.elecom.2008.10.052

R. V. Chebiam, F. Prado, and A. Manthiram, Soft chemistry synthesis and characterization of layered Li 1?x Ni 1?y Co y O 2 (0 ? x ? 1 and 0 ? y ? 1), Chem. Mater, vol.12, pp.2951-2957, 2001.

A. Nyten, A. Abouimrane, M. Armand, T. Gustaffson, and J. Thomas, Electrochemical performance of Li2FeSiO4 as a new Li-battery cathode material, Electrochemistry Communications, vol.7, issue.2, pp.156-160, 2005.
DOI : 10.1016/j.elecom.2004.11.008

K. Zaghib, A. Ait-salah, N. Ravet, A. Mauger, F. Gendron et al., Structural, magnetic and electrochemical properties of lithium iron orthosilicate, Journal of Power Sources, vol.160, issue.2, pp.1381-1386, 2006.
DOI : 10.1016/j.jpowsour.2006.03.023
URL : https://hal.archives-ouvertes.fr/hal-01293306

R. Dominko, M. Bele, M. Gaberscek, A. Meden, M. Remska et al., Structure and electrochemical performance of Li2MnSiO4 and Li2FeSiO4 as potential Li-battery cathode materials, Structure and electrochemical performance of Li 2 MnSiO 4 and Li 2 FeSiO 4 as potential Li-battery cathode materials, pp.217-222, 2006.
DOI : 10.1016/j.elecom.2005.11.010

Y. Chung, S. Yu, M. S. Song, S. Kim, and W. Cho, /C Cathode Nanocomposite, Bulletin of the Korean Chemical Society, vol.32, issue.12, pp.4205-4209, 2011.
DOI : 10.5012/bkcs.2011.32.12.4205

Y. Xiao, Z. Gong, and Y. Yang, Synthesis and characterization of Li 2 MnSiO 4 /C nanocomposite cathode material for lithium-ion batteries, J. Power Sources, vol.174, pp.528-532, 2007.

R. Dominko, Li2MSiO4 (M=Fe and/or Mn) cathode materials, Journal of Power Sources, vol.184, issue.2, pp.462-468, 2008.
DOI : 10.1016/j.jpowsour.2008.02.089

D. Rangappa, K. D. Murukanahally, T. Tomai, and A. Unemoto, (M = Fe, Mn) as High-Capacity Li-Ion Battery Electrode, Nano Letters, vol.12, issue.3, pp.1146-1151, 2012.
DOI : 10.1021/nl202681b