R. Naslain, Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview, Composites Science and Technology, vol.64, issue.2, pp.155-170, 2004.
DOI : 10.1016/S0266-3538(03)00230-6

K. Triantou, B. Perez, A. Marinou, S. Florez, K. Mergia et al., Performance of cork and ceramic matrix composite joints for re-entry thermal protection structures, Composites Part B: Engineering, vol.108, 2017.
DOI : 10.1016/j.compositesb.2016.09.104

Y. Wang, Z. Chen, S. Yu, D. Awuye, B. Li et al., Improved sandwich structured ceramic matrix composites with excellent thermal insulation, Composites Part B: Engineering, vol.129, pp.180-186, 2017.
DOI : 10.1016/j.compositesb.2017.07.068

F. Zok, Ceramic-matrix composites enable revolutionary gains in turbine engine efficiency, American Ceramic Society Bulletin, vol.95, pp.22-28, 2016.

I. Berdoyes, T. J. Bouillon, and E. , Improved SiC/SiC and C/C materials applications parts, Proceedings of the European congress on advanced materials and processes, EUROMAT 2005, pp.5-8

L. Yang, H. Liu, and H. Cheng, Processing-temperature dependent micro- and macro-mechanical properties of SiC fiber reinforced SiC matrix composites, Composites Part B: Engineering, vol.129, pp.152-61, 2017.
DOI : 10.1016/j.compositesb.2017.07.079

P. Peters, E. Martin, and P. Pluvinage, The influence of porosity on the engineering moduli of fibre reinforced ceramics (SiC/SiC) Composites, pp.108-114, 1995.

S. Prouhet, G. Camus, C. Labrugère, A. Guette, and E. Martin, Mechanical Characterization of Si-C(O) Fiber/SiC (CVI) Matrix Composites witrTa BN-Interphase, Journal of the American Ceramic Society, vol.19, issue.10, pp.649-656, 1994.
DOI : 10.1007/978-94-009-1129-1_3

T. Ogasawara, T. Ishikawa, H. Ito, N. Watanabe, and I. Davies, Multiple Cracking and Tensile Behavior for an Orthogonal 3-D Woven Si-Ti-C-O Fiber/Si-Ti-C-O Matrix Composite, Journal of the American Ceramic Society, vol.76, issue.9, pp.1565-1574, 2001.
DOI : 10.1111/j.1151-2916.1998.tb02627.x

J. Kabel, Y. Yang, M. Balooch, C. Howard, T. Koyanagi et al., Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms, Composites Part B: Engineering, vol.131, pp.173-83, 2017.
DOI : 10.1016/j.compositesb.2017.07.035

G. Morsher and N. Godin, Use of Acoustic Emission for Ceramic Matrix Composites, Ceramic Matrix Composites Materials, Modeling and Technology Wiley, vol.424, issue.5, pp.571-590, 2015.
DOI : 10.1016/j.tecto.2006.03.032

S. Kobayashi, A. Morohoshi, S. Wakayama, Y. Kogo, and H. Hatta, The effect of specimen width on the bending strength of ceramic matrix textile composites, Composites Part B: Engineering, vol.36, issue.4, pp.359-364, 2005.
DOI : 10.1016/j.compositesb.2004.09.003

M. He, B. Wu, A. Evans, and J. Hutchison, Inelastic strains due to matrix cracking in unidirectional fiber-reinforced composites, Mechanics of Materials, vol.18, issue.3, pp.213-229, 1994.
DOI : 10.1016/0167-6636(94)90022-1

I. Ismar and D. Reinert, Modelling of the micromechanical behaviour of unidirectional fibre-reinforced ceramics by the example of SiC/SiC, Archive of Applied Mechanics, vol.68, issue.3, pp.34-44, 1995.
DOI : 10.1007/BF00786687

C. Chateau, L. Gélébart, M. Bornert, J. Crépin, D. Caldemaison et al., Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites, Journal of the Mechanics and Physics of Solids, vol.63, pp.298-319, 2014.
DOI : 10.1016/j.jmps.2013.09.001
URL : https://hal.archives-ouvertes.fr/hal-00903466

D. Marshall, Analysis of fiber debonding and sliding experiments in brittle matrix composites. Acta metal, Mater, vol.3, pp.427-441, 1992.

P. Peters, E. Martin, and J. Quenisset, Slip and Frictional Shear Stresses in Ceramic Matrix Composites, Journal of Composite Materials, vol.75, issue.10, pp.550-572, 1995.
DOI : 10.1111/j.1151-2916.1992.tb05495.x

J. Neumeister, A constitutive law for continuous fiber reinforced brittle matrix composites with fiber fragmentation and stress recovery, Journal of the Mechanics and Physics of Solids, vol.41, issue.8, pp.1383-1404, 1993.
DOI : 10.1016/0022-5096(93)90085-T

C. Hui, S. Phoenix, M. Ibnabdeljalil, and R. Smith, An exact closed form solution for fragmentation of Weibull fibers in a single filament composite with applications to fiber-reinforced ceramics, Journal of the Mechanics and Physics of Solids, vol.43, issue.10, pp.1551-1585, 1995.
DOI : 10.1016/0022-5096(95)00045-K

Z. Xia and J. Hutchinson, Matrix cracking of cross-ply ceramic composites, Acta Metallurgica et Materialia, vol.42, issue.6, pp.1933-1978, 1994.
DOI : 10.1016/0956-7151(94)90018-3

V. Rajan, J. Shaw, M. Rossol, and F. Zok, An elastic???plastic constitutive model for ceramic composite laminates, Composites Part A: Applied Science and Manufacturing, vol.66, pp.44-57, 2014.
DOI : 10.1016/j.compositesa.2014.06.013

A. Gasser, P. Ladevèze, and M. Poss, Damage mechanisms of a woven SiC/SiC composite: Modelling and identification, Composites Science and Technology, vol.56, issue.7, pp.779-784, 1996.
DOI : 10.1016/0266-3538(96)00020-6

G. Camus, Modelling of the mechanical behavior and damage processes of fibrous ceramic matrix composites: application to a 2-D SiC/SiC, International Journal of Solids and Structures, vol.37, issue.6, pp.919-942, 2000.
DOI : 10.1016/S0020-7683(99)00065-7

L. Marcin, M. J. Carrère, N. Martin, and E. , Development of a Macroscopic Damage Model for Woven Ceramic Matrix Composites, International Journal of Damage Mechanics, vol.62, issue.6, pp.939-57, 2010.
DOI : 10.1177/105678959600500301

M. Grujicic, J. Snipes, R. Galgalikar, R. Yavari, V. Avuthu et al., Multi-length-scale derivation of the room-temperature material constitutive model for SiC/SiC ceramic-matrix composites, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2015, pp.10-1177
DOI : 10.3934/matersci.2015.3.163

L. Borkowski and A. Chattopadhyay, Multiscale model of woven ceramic matrix composites considering manufacturing induced damage, Composite Structures, vol.126, pp.62-71, 2015.
DOI : 10.1016/j.compstruct.2015.02.015

Y. Gowayed, G. Ojard, U. Santhosh, and G. Jefferson, Modeling of crack density in ceramic matrix composites, Journal of Composite Materials, vol.49, issue.18, pp.10-1177, 2014.
DOI : 10.1016/0010-4361(88)90544-7

U. Santhosh, J. Ahmad, G. Ojard, R. Miller, and Y. Gowayed, Deformation and damage modeling of ceramic matrix composites under multiaxial stresses, Composites Part B: Engineering, vol.90, pp.97-106, 2016.
DOI : 10.1016/j.compositesb.2015.12.017

Y. Gowayed, E. Abouzeida, I. Smyth, G. Ojard, J. Ahmad et al., The role of oxidation in time-dependent response of ceramic???matrix composites, Composites Part B: Engineering, vol.76, pp.20-30, 2015.
DOI : 10.1016/j.compositesb.2015.02.005

N. Moës, J. Dolbow, and T. Belytschko, A finite element method for crack growth without remeshing, International Journal for Numerical Methods in Engineering, vol.8, issue.1, pp.131-150, 1999.
DOI : 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J

M. Naderi, J. Jung, and Q. Yang, A three dimensional augmented finite element for modeling arbitrary cracking in solids, International Journal of Fracture, vol.40, issue.2, pp.10-1007, 2016.
DOI : 10.1007/s00466-006-0115-0

D. Leguillon, Strength or toughness? A criterion for crack onset at a notch, European Journal of Mechanics - A/Solids, vol.21, issue.1, pp.61-72, 2002.
DOI : 10.1016/S0997-7538(01)01184-6

D. Taylor, The theory of critical distances: a new perspective in fracture mechanics, 2007.

F. Ibáñez-gutiérrez, S. Cicero, I. Carrascal, and I. Procopio, Effect of fibre content and notch radius in the fracture behaviour of short glass fibre reinforced polyamide 6: An approach from the Theory of Critical Distances, Composites Part B: Engineering, vol.94, pp.299-311, 2016.
DOI : 10.1016/j.compositesb.2016.03.064

E. Martin, D. Leguillon, and N. Carrère, A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates, International Journal of Solids and Structures, vol.47, issue.9, pp.1297-305, 2010.
DOI : 10.1016/j.ijsolstr.2010.01.018

J. Hebel, R. Dieringer, and W. Becker, Modelling brittle crack formation at geometrical and material discontinuities using a finite fracture mechanics approach, Engineering Fracture Mechanics, vol.77, issue.18, pp.3558-72, 2010.
DOI : 10.1016/j.engfracmech.2010.07.005

P. Camanho, G. Erçin, G. Catalanotti, S. Mahdi, and P. Linde, A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates, Composites Part A: Applied Science and Manufacturing, vol.43, issue.8, pp.1219-1225, 2012.
DOI : 10.1016/j.compositesa.2012.03.004

E. Martin, D. Leguillon, and N. Carrère, A coupled strength and toughness criterion for the prediction of the open hole tensile strength of a composite plate, International Journal of Solids and Structures, vol.49, issue.26, pp.3915-3937, 2012.
DOI : 10.1016/j.ijsolstr.2012.08.020
URL : https://hal.archives-ouvertes.fr/hal-00874490

I. García, V. Manti?, A. Blázquez, and F. París, Transverse crack onset and growth in cross-ply <mml:math altimg="si39.gif" overflow="scroll" xmlns:xocs="http://www.elsevier.com/xml/xocs/dtd" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.elsevier.com/xml/ja/dtd" xmlns:ja="http://www.elsevier.com/xml/ja/dtd" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:tb="http://www.elsevier.com/xml/common/table/dtd" xmlns:sb="http://www.elsevier.com/xml/common/struct-bib/dtd" xmlns:ce="http://www.elsevier.com/xml/common/dtd" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:cals="http://www.elsevier.com/xml/common/cals/dtd" xmlns:sa="http://www.elsevier.com/xml/common/struct-aff/dtd"><mml:mrow><mml:msub><mml:mrow><mml:mo stretchy="false">[</mml:mo><mml:mn>0</mml:mn><mml:mo>/</mml:mo><mml:mn>90</mml:mn><mml:mo stretchy="false">]</mml:mo></mml:mrow><mml:mrow><mml:mi mathvariant="normal">s</mml:mi></mml:mrow></mml:msub></mml:mrow></mml:math> laminates under tension. Application of a coupled stress and energy criterion, International Journal of Solids and Structures, vol.51, issue.23-24, pp.3844-3856, 2014.
DOI : 10.1016/j.ijsolstr.2014.06.015

I. García, B. Carter, A. Ingraffea, and V. Manti?, A numerical study of transverse cracking in cross-ply laminates by 3D finite fracture mechanics, Composites Part B: Engineering, vol.95
DOI : 10.1016/j.compositesb.2016.03.023

L. Nguyen, D. Leguillon, O. Gillia, and E. Riviere, Bond failure of a SiC/SiC brazed assembly, Mechanics of Materials, vol.50, pp.1-8, 2012.
DOI : 10.1016/j.mechmat.2012.03.001
URL : https://hal.archives-ouvertes.fr/hal-01562899

A. Moradi, D. Leguillon, and N. Carrère, Influence of the adhesive thickness on a debonding ??? An asymptotic model, Engineering Fracture Mechanics, vol.114, pp.55-68, 2013.
DOI : 10.1016/j.engfracmech.2013.10.008
URL : https://hal.archives-ouvertes.fr/hal-00978658

A. Moradi, N. Carrère, D. Leguillon, E. Martin, and J. Cognard, Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: Effect of material and geometrical parameters, International Journal of Adhesion and Adhesives, vol.47, pp.73-82, 2013.
DOI : 10.1016/j.ijadhadh.2013.09.044
URL : https://hal.archives-ouvertes.fr/hal-01563061

P. Weißgraeber and W. Becker, Finite Fracture Mechanics model for mixed mode fracture in adhesive joints, International Journal of Solids and Structures, vol.50, issue.14-15, pp.2383-94, 2013.
DOI : 10.1016/j.ijsolstr.2013.03.012

P. Weißgraeber, J. Felger, A. Talmon-l-'armée, and W. Becker, Crack initiation in single lap joints: effects of geometrical and material properties, International Journal of Fracture, vol.30, issue.2, pp.155-66, 2015.
DOI : 10.1016/j.ijadhadh.2009.09.001

N. Carrère, E. Martin, and D. Leguillon, Comparison between models based on a coupled criterion for the prediction of the failure of adhesively bonded joints, Engineering Fracture Mechanics, vol.138, pp.185-201, 2015.
DOI : 10.1016/j.engfracmech.2015.03.004

E. Martin, T. Vandellos, D. Leguillon, and N. Carrère, Initiation of edge debonding: coupled criterion versus cohesive zone model, International Journal of Fracture, vol.42, issue.2, pp.157-68, 2016.
DOI : 10.1016/0022-5096(94)90003-5
URL : https://hal.archives-ouvertes.fr/hal-01308369

Z. Yosibash, E. Priel, and D. Leguillon, A failure criterion for brittle elastic materials under mixed-mode loading, International Journal of Fracture, vol.125, issue.3???4, pp.291-312, 2006.
DOI : 10.1007/s10704-006-0083-6

I. García and D. Leguillon, Mixed-mode crack initiation at a v-notch in presence of an adhesive joint, International Journal of Solids and Structures, vol.49, issue.15-16, pp.2138-2149, 2012.
DOI : 10.1016/j.ijsolstr.2012.04.018

A. Sapora, P. Cornetti, and A. Carpinteri, A Finite Fracture Mechanics approach to V-notched elements subjected to mixed-mode loading, Engineering Fracture Mechanics, vol.97, pp.216-226, 2013.
DOI : 10.1016/j.engfracmech.2012.11.006

D. Leguillon and E. Martin, The strengthening effect caused by an elastic contrast???part II: stratification by a thin stiff layer, International Journal of Fracture, vol.74, issue.1???4, pp.169-78, 2012.
DOI : 10.1007/s101890170150
URL : https://hal.archives-ouvertes.fr/hal-01667041

D. Leguillon and E. Martin, The strengthening effect caused by an elastic contrast???part I: the bimaterial case, International Journal of Fracture, vol.41, issue.11, pp.157-6710, 2012.
DOI : 10.1007/BF00035371
URL : https://hal.archives-ouvertes.fr/hal-01562946

D. Leguillon, E. Martin, O. ?eve?ek, and R. Bermejo, Application of the coupled stress-energy criterion to predict the fracture behaviour of layered ceramics designed with internal compressive stresses, European Journal of Mechanics - A/Solids, vol.54, pp.94-104, 2015.
DOI : 10.1016/j.euromechsol.2015.06.008
URL : https://hal.archives-ouvertes.fr/hal-01176591

P. Weißgraeber, D. Leguillon, and W. Becker, A review of Finite Fracture Mechanics: crack initiation at singular and non-singular stress raisers. Archive of Applied Mechanics 2015, pp.10-1007

E. Martin, D. Leguillon, and N. Carrère, Finite fracture mechanics: a useful tool to analyze cracking mechanisms in composite materials Fifty Years of Progress in Carbon Fiber Research, pp.529-548, 2016.

D. Quesada, D. Leguillon, and C. Putot, Multiple failures in or around a stiff inclusion embedded in a soft matrix under a compressive loading, European Journal of Mechanics - A/Solids, vol.28, issue.4, pp.668-79, 2009.
DOI : 10.1016/j.euromechsol.2009.03.001
URL : https://hal.archives-ouvertes.fr/hal-00634693

D. Leguillon, M. Lafarie-frenot, Y. Pannier, and E. Martin, Prediction of the surface cracking pattern of an oxidized polymer induced by residual and bending stresses, International Journal of Solids and Structures, vol.91, pp.89-101, 2016.
DOI : 10.1016/j.ijsolstr.2016.04.019
URL : https://hal.archives-ouvertes.fr/hal-01311576

D. Leguillon, J. Li, and E. Martin, Multi-cracking in brittle thin layers and coatings using a FFM model, European Journal of Mechanics - A/Solids, vol.63, pp.14-21, 2017.
DOI : 10.1016/j.euromechsol.2016.12.003
URL : https://hal.archives-ouvertes.fr/hal-01427106

A. Doitrand, C. Fagiano, F. Hild, V. Chiaruttini, A. Mavel et al., Mesoscale analysis of damage growth in woven composites, Composites Part A: Applied Science and Manufacturing, vol.96, 2017.
DOI : 10.1016/j.compositesa.2017.02.018
URL : https://hal.archives-ouvertes.fr/hal-01480982

J. Li and D. Leguillon, Finite element implementation of the coupled criterion for numerical simulations of crack initiation and propagation in brittle materials. Theoretical and Applied Fracture Mechanics 2017
URL : https://hal.archives-ouvertes.fr/hal-01578011

V. Herb, G. Couégnat, and E. Martin, Damage assessment of thin SiC/SiC composite plates subjected to quasi-static indentation loading, Composites Part A: Applied Science and Manufacturing, vol.41, issue.11, pp.1677-1685, 2010.
DOI : 10.1016/j.compositesa.2010.08.004

V. Herb, E. Martin, and G. Couégnat, Damage analysis of thin 3D-woven SiC/SiC composite under low velocity impact loading, Composites Part A: Applied Science and Manufacturing, vol.43, issue.2, pp.247-253, 2012.
DOI : 10.1016/j.compositesa.2011.10.013

G. Couégnat, R. W. Haurat, T. Germain, C. Martin, E. Vignoles et al., An Integrated Virtual Material Approach for Ceramic Matrix Composites, 36th International Conference on Advanced Ceramics & Composites (ICACC), pp.22-27, 2012.
DOI : 10.4028/www.scientific.net/AST.73.65

G. Couégnat, E. Martin, and J. Lamon, 3D Multiscale Modeling of the Mechanical Behavior of Woven Composite Materials, Ceram. Eng. Sci. Proc, vol.41, pp.185-194, 2010.
DOI : 10.1016/j.finel.2004.07.002

C. Lorrette, A. Réau, and L. Briottet, Mechanical properties of nanostructured silicon carbide consolidated by spark plasma sintering, Journal of the European Ceramic Society, vol.33, issue.1, pp.147-56, 2013.
DOI : 10.1016/j.jeurceramsoc.2012.07.030

C. Sauder, A. Brusson, and J. Lamon, Influence of Interface Characteristics on the Mechanical Properties of Hi-Nicalon type-S or Tyranno-SA3 Fiber-Reinforced SiC/SiC Minicomposites, International Journal of Applied Ceramic Technology, vol.64, issue.[6], pp.291-303, 2010.
DOI : 10.1111/j.1151-2916.1999.tb02105.x

A. Almansour, E. Maillet, S. Ramasamy, and G. Morscher, Effect of fiber content on single tow SiC minicomposite mechanical and damage properties using acoustic emission, Journal of the European Ceramic Society, vol.35, issue.13, pp.3389-99, 2015.
DOI : 10.1016/j.jeurceramsoc.2015.06.001